The section introduces the WebLogic Server Administration Console.
About the WebLogic Server Administration Console
The WebLogic Server Administration Console is a Web browser-based, graphical user interface that you use to manage a WebLogic Server domain. A WebLogic Server domain is a logically related group of WebLogic Server resources that you manage as a unit. A domain includes one or more WebLogic Servers and may also include WebLogic Server clusters. Clusters are groups of WebLogic Servers instances that work together to provide scalability and high-availability for applications. You deploy and manage your applications as part of a domain.
One instance of WebLogic Server in each domain is configured as an Administration Server. The Administration Server provides a central point for managing a WebLogic Server domain. All other WebLogic Server instances in a domain are called Managed Servers. In a domain with only a single WebLogic Server instance, that server functions both as Administration Server and Managed Server. The Administration Server hosts the WebLogic Server Administration Console, which is a Web application accessible from any supported Web browser with network access to the Administration Server. Managed Servers host applications.
Use the WebLogic Server Administration Console to:
Configure, start, and stop WebLogic Server instances
Configure WebLogic Server clusters
Configure WebLogic Server services, such as database connectivity (JDBC) and messaging (JMS)
Configure security parameters, including managing users, groups, and roles
Configure and deploy your applications
Monitor server and application performance
View server and domain log files
View application deployment descriptors
Edit selected run-time application deployment descriptor elements
Control (start, stop, and restart) managed Coherence servers
Create and configure Coherence clusters
WebLogic Server Administration Console Online Help
The WebLogic Server Administration Console includes a complete help system. It has two parts:
How do I...?, which documents procedures for tasks you can perform through using the WebLogic Server Administration Console.
WebLogic Server Administration Console Reference, which provides reference information for each page in the WebLogic Server Administration Console, including descriptions of the attributes you can set using the WebLogic Server Administration Console.
You can access the WebLogic Server Administration Console online help either through the WebLogic Server Administration Console itself, or in Oracle WebLogic Server Administration Console Online Help.
Console Errors
Messages (including information, warning, and error messages) can be generated and logged in the course of using the WebLogic Server Administration Console. You can view WebLogic Server logs from the Diagnostics > Log Files page of the WebLogic Server Administration Console.
Starting the WebLogic Server Administration Console
This section contains instructions for starting the WebLogic Server Administration Console.
To use the WebLogic Server Administration Console, use one of the supported Web browsers for your environment. See "Supported Configurations" in What's New in Oracle WebLogic Server. If your Web browser is not a supported browser, you may experience functional or formatting problems when using the WebLogic Server Administration Console.
To start the WebLogic Server Administration Console:
Start an Administration Server.
Open one of the supported Web browsers to the following URL:
http://hostname:port/consolewhere
hostnameis the DNS name or IP address of the Administration Server andportis the listen port on which the Administration Server is listening for requests (port 7001 by default). If you have configured a domain-wide administration port, use that port number. If you configured the Administration Server to use Secure Socket Layer (SSL) you must addsafterhttpas follows:https://hostname:port/console
Note:
A domain-wide administration port always uses SSL.
When the login page appears, enter the user name and the password you used to start the Administration Server (you may have specified this user name and password during the installation process) or enter a user name that belongs to one of the following security groups: Administrators, Operators, Deployers, or Monitors. These groups provide various levels of access to system administration functions in the WebLogic Server Administration Console.
Using the security system, you can add or delete users to one of these groups to provide controlled access to the Console.
Note:
If you have your browser configured to send HTTP requests to a proxy server, then you may need to configure your browser to not send Administration Server HTTP requests to the proxy. If the Administration Server is on the same machine as the browser, then ensure that requests sent to localhost or 127.0.0.1 are not sent to the proxy.
Enabling the WebLogic Server Administration Console
By default, the WebLogic Server Administration Console is enabled. If you disable it, you can re-enable it using the WebLogic Scripting Tool (WLST). Start the Administration Server, then invoke WLST and use the following commands:
Example 3-1 Using WLST to Re-enable the Console
connect("username","password")edit()startEdit()cmo.setConsoleEnabled(true)save()activate()The following attribute(s) have been changed on MBeans which require server re-start.MBean Changed : com.bea:Name=mydomain,Type=Domain Attributes changed : ConsoleEnabledActivation completeddisconnect()exit()For information about using WLST, see Understanding the WebLogic Scripting Tool.
Elements of the WebLogic Server Administration Console
The WebLogic Server Administration Console user interface includes the following panels:
Change Center
This is the starting point for using the WebLogic Server Administration Console to make changes in WebLogic Server. See Using the Change Center.
Domain Structure
This panel contains a tree structure you can use to navigate to pages in the WebLogic Server Administration Console. Select any of the nodes in the Domain Structure tree to view that page. Click a + (plus) icon in the Domain Structure to expand a node and a - (minus) icon to collapse the node.
How do I...
This panel includes links to online help tasks that are relevant to the current Console page.
Tool Bar
The tool bar at the top of the Console includes the following elements:
| Tool Bar Element | Description |
|---|---|
| Welcome message | Indicates user name with which you have logged into the Console. |
| Connected to: | The IP address and port you used to connect to the Console. |
| Home | A link to the top page of the Console. |
| Log Out | Click to log out of the Console. |
| Preferences | A link to a page where you can change some Console behavior. |
| Record | Starts recording your configuration actions as a series of WebLogic Scripting Tool (WLST) commands. Writes the commands to a separate file that you can replay in WLST. See "Record WLST Scripts" in Oracle WebLogic Server Administration Console Online Help. |
| Help | A link to the WebLogic Server Administration Console Online Help. |
| Search | A text field in which you can enter a string to find any WebLogic Server Configuration MBeans that contain the string you specified in their name. |
Breadcrumb Navigation
A series of links that show the path you have taken through the WebLogic Server Administration Console's pages. You can click on any of the links to return to a previously-visited page.
System Status
The System Status panel reports on the number of information, error, and warning messages that have been logged. You can view these messages in the server log files, which you can access from the WebLogic Server Administration Console at Diagnostics > Log Files.
Using the Change Center
The starting point for using the WebLogic Server Administration Console to make changes in your WebLogic Server domain is the Change Center. The Change Center provides a way to lock a domain configuration so you can make changes to the configuration while preventing other accounts from making changes during your edit session. See How Change Management Works.
The domain configuration locking feature is always enabled in production domains. It can be enabled or disabled in development domains. It is disabled by default when you create a new development domain. See "Enable and disable the domain configuration lock" in Oracle WebLogic Server Administration Console Online Help.
To change a production domain's configuration, you must:
Locate the Change Center in the upper left of the WebLogic Server Administration Console screen.
Click the Lock & Edit button to lock the configuration edit hierarchy for the domain.
Make the changes you desire on the relevant page of the Console. Click Save on each page where you make a change.
When you have finished making all the desired changes, click Activate Changes in the Change Center.
As you make configuration changes using the WebLogic Server Administration Console, you click Save (or in some cases Finish) on the appropriate pages. This does not cause the changes to take effect immediately. The changes take effect when you click Activate Changes in the Change Center. At that point, the configuration changes are distributed to each of the servers in the domain. If the changes are acceptable to each of the servers, then they take effect. If any server cannot accept a change, then all of the changes are rolled back from all of the servers in the domain. The changes are left in a pending state; you can then either edit the pending changes to resolve the problem or revert the pending changes.
Undoing Changes
You can revert any pending (saved, but not yet activated) changes by clicking Undo All Changes in the Change Center. You can revert any individual change by going to the appropriate page in the WebLogic Server Administration Console and restoring the attribute to its previous value.
Releasing the Configuration Lock
You release the configuration lock as follows:
Before you make changes, click Release Configuration in the Change Center to release the lock explicitly.
After you save changes, click Activate Changes or Undo All Changes in the Change Center to release the lock implicitly.
Stopping the Administration Server does not release the configuration lock. When the Administration Server starts again, the configuration lock is in the same state it was in when the Administration Server was shut down, and any pending changes are preserved.
How Change Management Works
To provide a secure, predictable means for distributing configuration changes in a domain, WebLogic Server imposes a change management process that loosely resembles a database transaction. The configuration of a domain is represented on the file system by a set of XML configuration files, centralized in the config.xml file, and at run time by a hierarchy of Configuration MBeans. When you edit the domain configuration, you edit a separate hierarchy of Configuration MBeans that resides on the Administration Server. To start the edit process, you obtain a lock on the edit hierarchy to prevent other people from making changes. When you finish making changes, you save the changes to the edit hierarchy. The changes do not take effect, however, until you activate them, distributing them to all server instances in the domain. When you activate changes, each server determines whether it can accept the change. If all servers are able to accept the change, they update their working configuration hierarchy and the change is completed.
For more information about change management, see "Managing Configuration Changes" in Understanding Domain Configuration for Oracle WebLogic Server.
Dynamic and Non-Dynamic Changes
Some changes you make in the WebLogic Server Administration Console take place immediately when you activate them. Other changes require you to restart the server or module affected by the change. These latter changes are called non-dynamic changes. Non-dynamic changes are indicated in the WebLogic Server Administration Console with this warning icon:
Description of the illustration nondynchange.gif
Changes to dynamic configuration attributes become available once they are activated, without restarting the affected server or system restart. These changes are made available to the server and run-time hierarchies once they are activated. Changes to non-dynamic configuration attributes require that the affected servers or system resources be restarted before they become effective.
If a change is made to a non-dynamic configuration setting, no changes to dynamic configuration settings will take effect until after restart. This is to assure that a batch of updates having a combination of dynamic and non-dynamic attribute edits will not be partially activated.
Note that WebLogic Server's change management process applies to changes in domain and server configuration data, not to security or application data.
Viewing Changes
You can view any changes that you have saved, but not yet activated, by clicking the View Changes and Restarts link in the Change Center. The View Changes and Restarts link presents two tabs, Change List and Restart Checklist:
The Change List page presents all changes that have been saved, but not yet activated.
The Restart Checklist lists all servers for which non-dynamic changes have been activated, but which require restarts before the changes become effective.
FAQs
What is Webroot management console? ›
The Management Console is a central website that administrators can use to view and manage network status. The administrator who first created the Webroot account has access to all functions in the portal; for more information, see Creating Accounts.
How to reset user password in Oracle Apps from frontend? ›- Sign in to Applications Console or Infrastructure Classic Console. Sign in to the Applications Console if you want to work with Oracle Cloud Applications. ...
- Open the navigation menu. ...
- Click the Users tab.
- Search for the user whose password you need to reset. ...
- Click. ...
- Click Reset.
- Navigate to the Users page in your Google admin console.
- Click your user from the list.
- In the left menu, select 'RESET PASSWORD'.
- Enter your new password in the prompt.
- Click 'RESET' to save your changes.
From the top menu, select "Session > Change Password". In the subsequent dialog, enter the current password and the new password with verification. Click the OK button.
Is Webroot good or bad? ›Webroot is easy to install, set up, and use — it's an overall good product for users who are looking for an intuitive antivirus that doesn't have complex settings or customization options. Webroot's interface is clean, simple, and user-friendly.
How to remove Webroot without console? ›- Open Programs and Features (enter appwiz. cpl at the Search line).
- Find and select Webroot SecureAnywhere.
- Click Uninstall.
- Acknowledge any messages presented.
- Delete the WRData and WRCore directories (if present) from ProgramData, which is a hidden system directory. ...
- Reboot the computer to complete the process.
- Start SQL*Plus and log in as the SYS user, connecting as SYSDBA: Copy. $ $ORACLE_HOME/bin/sqlplus SQL> CONNECT SYS as SYSDBA Enter password: sys_password.
- Enter the command ALTER USER account IDENTIFIED BY password ACCOUNT UNLOCK; to unlock an account. Note:
There are three options to recover a forgotten password: contact the administrator, generate a recovery email, or contact Oracle Support.
How to unlock Oracle user account without changing password? ›- Install Oracle DB 19c.
- Install the sample database.
- Autostart ORCLCDB.
- Connect to and open ORCLPDB1.
- Move Oracle DB files.
- Turn off password expiration.
- Create a pluggable database (PDB)
- Unlock an account without changing its password.
On the Command Prompt, type the command: net user and press "Enter" to list all the users account on your Windows system. Please remember the account name for the administrator. Step 5. Then, input this command: net user [username]"" and press "Enter" to remove the password for the target account.
How do I unlock my administrator password? ›
- Open the Windows Start menu. ...
- Then select Settings. ...
- Then click on Accounts.
- Next, click on Your info. ...
- Click on Manage my Microsoft Account. ...
- Then click More actions. ...
- Next, click Edit profile from the drop-down menu.
- Then click change your password.
To reset your Windows 10 admin password, select Forgot Password? on your Windows 10 device's sign-in screen. Or, go to the Start menu > Settings > Accounts > Your Info > Manage my Microsoft Account. Select More Options > Edit Profile > Change Your Password.
What is the default username and password for Oracle database? ›ORACLE creates a default account with the user ID "SYSADMIN" and password "SYSADMIN". It is best practice to remove default accounts, if possible. For accounts required by the system, the default password should be changed. This account grants user level access to the system.
How to change Oracle password using command prompt? ›Log in to the database through the command prompt as you normally would. Enter your <Username> and <Current Password> . Enter password in the SQL Worksheet window. A “New password” window will appear for you to change your password.
How to reset sysadmin password in Oracle? ›- Shutdown Apps Tier Services using the command. ...
- Change Password using. ...
- Run AutoConfig for newly created password.
- Start just Admin Server using $INST_TOP/admin/scripts/adadminsrvctl.sh (Don't start other services yet)
Every day, hackers release thousands of viruses and other malware. And Webroot protects millions of people against them. All the features from Window Washer and Spy Sweeper: Spyware protection.
What is Webroot and why is it on my computer? ›Webroot Antivirus is cloud-based antivirus and antimalware software that includes additional features like a firewall, phishing protection, and defense against ransomware for full-coverage protection in a lightweight package.
What is Webroot and do I need it? ›Webroot is one of the best antivirus and anti-malware software options that we recommend. It's jam-packed with features and has super quick scans that don't bog down your computer. Webroot SecureAnywhere isn't without its problems, though.
How to install Webroot from management console? ›Log in to the Webroot Management console. In the Sites list, find and click the site you want to deploy agents to. In the top nav bar, click Endpoint Protection. In the right side of the screen in the Download software section, click Download Windows (.exe) to download the renamed installer for the site.